Hello Bob!

I used the GE_120C.zip that you put on hold for me and it installed my key into

the progrma... MBUTIL works, GECHO does not it just keeps sayng

=============

.GEcho/32 1.20/Pro Electronic Mail Processor Professional version
Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved.

Registered to Allen Prunty (1:2320/100)

Registered versions may only be used by registered users!

C:\gecho>



===================

It won't do anything. MBUTIL works jjust fine though


Allen


... But it's not against any religion / To want to dispose of a pigeon.
--- LiveWire
# Origin: LiveWire BBS -=*=- telnet://livewirebbs.com (1:2320/100)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Hello Bob!

I used the GE_120C.zip that you put on hold for me and it installed my
key into the progrma... MBUTIL works, GECHO does not it just keeps sayng

Did you place BOTH the files where you were instructed?


(from the original registration notes) ---------------------------------------------------------
NOTE: YOU MUST INSTALL AND USE THE FOLLOWING FILES THAT
COME WITH YOUR Gecho REGISTRATION OR YOU WILL GET AN INVALID
REGISTRATION and your GEcho WILL NOT FUNCTION:

GECHO.KEY <-- Comes in the archive attached to this message

KEYFILE.GE <-- Comes in the archive attached to this message ---------------------------------------------------------

=============

GEcho/32 1.20/Pro Electronic Mail Processor Professional version
Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved.

Registered to Allen Prunty (1:2320/100)

Registered versions may only be used by registered users!

C:\gecho>

I'd say that you did not follow the instructions.





.....Bob

--- GEcho/32 & IM 2.50
# Origin: Direct from the desktop of the Echo Moderator (1:140/12)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Hello Bob!

Replying to a msg dated 22 Oct 16 15:36, from you to me.

Both files are in the directory with my GECHO. When I installed it took my keys from one. I'm not sure if there's a command line thing I have to do with the other one. Remember I am a bit visually disabled with a traumatic brain injury. I rely a lot on screen readers and sometimes I do miss a few things.

I did the ginstall and it pulled up the serial numbers out of the GECHO.KEY

I'm not sure what to do with the other file other than put it in the directory with gecho.

Allen


... By the time we've made it, we've had it.
--- LiveWire
# Origin: LiveWire BBS -=*=- telnet://livewirebbs.com (1:2320/100)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Hello Bob!

Replying to a msg dated 22 Oct 16 15:36, from you to me.

I have run GSeUP KEYS and it pulled the following from one of the GECHO.KEY keyfile. What do I do with the second one? I tried it it does nothing.
all I can figure out to do with it is put it in the gecho directory.

Allen


GEcho SETUP 1.20/Pro Professional version
Copyright (C) 1991-1995 Gerard J. van der Land. All rights reserved.

Keys

Import keys C:\GECHO\GECHO.KEY

Registered to Allen Prunty
GEcho Key ----------
Registered to Allen Prunty
MBUTIL Key ---------

The "Registered to" text must be entered exactly as you received
it, with the same capitals, spaces, commas, dots, etc.


Allen


... BS (bee ess): n. An uninformed statement.
--- LiveWire
# Origin: LiveWire BBS -=*=- telnet://livewirebbs.com (1:2320/100)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

22 Oct 16 21:40, you wrote to Bob Seaborn:

I have run GSeUP KEYS and it pulled the following from one of the GECHO.KEY keyfile. What do I do with the second one? I tried it it does nothing. all I can figure out to do with it is put it in the gecho directory.

After running "gsetup keys" the only file you need at gecho dir is keyfile.ge.

Are you sure your key is for valid 1.20?

'Tommi

--- GEcho/32 1.20/Pro
# Origin: GEcho win32 test point (2:221/6.2)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Are you sure your key is for valid 1.20?

=========
valid for :)

--- GEcho/32 1.20/Pro
# Origin: GEcho win32 test point (2:221/6.2)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Hello Tommi!

23 Oct 16 12:25, you wrote to me:

Are you sure your key is for valid 1.20?

=========
valid for :)

It is valid and it now works. I don't know what I did to make it work, But it now seems to work. And it is tossing faster than anything I have ran so far. I

will be transitioning my bases over to Wildcat using golded slowly.

Allen


... Brainstorm? No, but I had a braindrizzle once.
--- GoldED+/W32-MINGW 1.1.5-b20160322
# Origin: LiveWire BBS -=*=- telnet://livewirebbs.com (1:2320/100)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)

Hello Bob!

Replying to a msg dated 22 Oct 16 15:36, from you to me.

Both files are in the directory with my GECHO. When I installed it took
my keys from one. I'm not sure if there's a command line thing I have
to do with the other one. Remember I am a bit visually disabled with a traumatic brain injury. I rely a lot on screen readers and sometimes I
do miss a few things.

I did the ginstall and it pulled up the serial numbers out of the
GECHO.KEY

I'm not sure what to do with the other file other than put it in the directory with gecho.

Which is where it goes.





.....Bob

--- GEcho/32 & IM 2.50
# Origin: Direct from the desktop of the Echo Moderator (1:140/12)
* Origin: LiveWire BBS - Synchronet - LiveWireBBS.com (1:2320/100)